Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A User Manual
Page 234
- 226 -
F
IGURE
7-14
2. To view DHCP gateway settings for a particular VLAN, click a VLAN ID. A window similar to the
following appears.
F
IGURE
7-15
3. Use the drop-down list to either enable or disable the DHCP gateway.
4. Maximum Hops shows the maximum number of hops that a DHCP request broadcast can be
relayed along the DHCP relay path from the DHCP client to the DHCP server. You can change this
value if desired.
5. Delay shows the number of seconds that must elapse before a DHCP request broadcast is relayed
to the next IP subnetwork. You can change this value if desired.
6. The remaining fields let you specify up to four preferred servers.
7. If you change any settings, click the Update Setting button to enable the parameters you selected.