7 bridging – Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A User Manual

Page 112

Advertising
background image

- 104 -

10. When you finish specifying the ping parameters, press Esc start pinging a remote IP address.

11. Press Esc again until the IP Networking screen appears.

5.7 Bridging

If you select Bridging from the Advanced Management screen, the following Bridging Parameters

screen appears.

F

IGURE

5-71

1. To change the MAC address table aging time, highlight Aging Time (seconds) and press Enter.

The following prompt asks you to either set an aging time or select no aging. (The maximum

number is 1,000,000 seconds)

Advertising
This manual is related to the following products: