Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A - Manual (Page 211)

- 203 -
6.4 Performing Basic Setup Activities
Pointing to Basic Setup on the image of the Switch displays the menu options shown in Figure 6-6.
F IGURE 6-6 B ASIC S ETUP O PTIONS
This menu has the following options:
General — lets you change the system name, location name, statistics collection, reboot-on-error,
and remote Telnet login capability. See section 6.4.1 “General Management Configuration”.
LAN Port — lets you view port status and configure port settings. See section 6.4.2 “Configuring
LAN Ports” on page 9.
Console Port — lets you change the console baud rate and flow control method; enable or
disable modem control; specify a modem setup flag and setup string; enable or disable SLIP; and
configure the SLIP address and SLIP subnet mask. See section 6.4.3 “Console Port
Configuration”.
6.4.1 General Management Configuration
Pointing to Basic Setup and clicking General displays the Basic Setup/General parameters (see
Figure 6-7). These parameters are the same that appear when you access the browser interface for the
first time.