1 administration console, 2 direct access – Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A User Manual

Page 24

Advertising
background image

- 16 -

Can be accessed from any location

Most visually appealing

May encounter delay times on
poor connections

SNMP Agent

Communicates with switch functions at
the MIB level

Based on open standards

Requires SNMP manager
software

Least visually appealing of all
three methods

Some settings require calculations

Security can be compromised
(hackers need only know the
community name)

3.1.1 Administration Console

The administration console is an internal, character-oriented, menu-driven user interface for performing

system administration such as displaying statistics or changing option settings. Using this method, you

can view the administration console from a terminal, personal computer, Apple Macintosh, or

workstation connected to the Switch’s console (serial) port.

There are two ways to use this management method: via direct access or modem port access. The

following sections describe these methods. For more information about using the console, refer to

Chapter 4 Menu-Driven Console Management

.

3.1.2 Direct Access

Direct access to the administration console is achieved by directly connecting a terminal or a PC

equipped with a terminal-emulation program (such as HyperTerminal) to the Switch console (serial)

port.

When using this management method, a null-modem cable is required to connect the Switch to the PC.

After making this connection, configure the terminal-emulation program to use the following

parameters:

The default parameters are:

115,200 bps

8 data bits

No parity

1 stop bit

You can change these settings, if desired, after you log on. This management method is often preferred

because you can remain connected and monitor the system during system reboots. Also, certain error

messages are sent to the serial port, regardless of the interface through which the associated action

was initiated. A Macintosh or PC attachment can use any terminal-emulation program for connecting to

the terminal serial port. A workstation attachment under UNIX can use an emulator such as TIP.

Advertising
This manual is related to the following products: