Planet Technology Planet Intelligent Gigabit Ethernet Stackable/Routing Switch WGSW-2402A - Manual (Page 257)

- 249 -
7.9 Viewing and/or Changing SNMP Parameters
To view and/or change all SNMP-related information, point to Advanced Setup and click SNMP. The
SNMP parameters in Figure 7-44 appear.
F IGURE 7-49 SNMP C ONFIGURATION P ARAMETERS
1. For SNMP , indicate whether it is enabled or disabled.
2. For Get Community Name , type a get community name.
3. For Set Community Name , type a set community name.
4. Use the four Trap Community text boxes to specify up to four trap community names (one
community name per text box).