Operating the hand scanner, Scanning a document – Panasonic KX-PW36CL User Manual
Page 14
14
Operating the hand scanner
1
Press down the handle of the hand scanner, and pull
out the scanner from the main unit. Then, turn over
the scanner to start scanning.
2
Press
(Resolution) repeatedly to select the
desired resolution.
●
(Standard)
●
(Fine)
●
(Photo)
3
Press
(Select) repeatedly to select the scanning
width.
●
A4: within 208 mm
●
B4: within 252 mm
4
Place the scanning position on the upper left side of
the document.
5
Press (Start).
●
When you hear a beep, you can start scanning.
Scanning a document
Scanning
position
6
Press the hand scanner against the document, and
move it slowly toward the direction of the arrow.
7
After scanning is completed, press
(Stop).
●
You will hear a beep, and the scanned document is
stored in memory of the main unit. Only 1 page can
be scanned.
8
To print the scanned document or to send it by fax,
see the next page.
●
If you make a mistake, press
(Stop) to erase
the content of the memory, then start from step 2.
Scanning
direction
Important:
●
When you have completed scanning, the scanned
document in memory will be automatically erased after
10 minutes.
●
To reinsert the hand scanner into the main unit, turn the
scanner over, and insert it into the main unit firmly.
●
When the hand scanner is out of the main unit, you
cannot make a copy or send a fax.