Panasonic SC-AK600 - Manual (Page 21)

21
RQT6243
Listening operations
Sound quality/sound field operations
Enjoying surround sound
Preparation
DOLBY DIGITAL: Press [DIGITAL INPUT 1/2] to select the
input source.
DOLBY PRO LOGIC: Press [ p PL] to select “NORMAL” or
“PHANTOM”.
Speaker level adjustments
Remote control only
If the level of the speakers appears to be different while listening to
a source, adjust the level of the speakers to the same apparent
level.
1 Press [SHIFT] + [TEST] to output a test signal.
L:
Front left
C: Center
R: Front right
RS: Right surround
LS: Left surround
SW: Subwoofer
When DOLBY PRO LOGIC is on
• The surround channel for Dolby Pro Logic is monaural so the
indicator appears as “S” instead.
• In the PHANTOM mode, the center speaker is OFF, so there
is no center test signal and “C” is not displayed.
2 Press [SHIFT] + [CH LEVEL (+, –)].
To stop the test signal, press [SHIFT] + [TEST] again.
To select a specific speaker
1 Press [SHIFT] + [CH SELECT] to select the speaker.
For Dolby Digital:
Every time you press the buttons:
L
→ C → R → RS → LS → SW
↑
For Dolby Pro Logic:
Every time you press the buttons:
L
→
C
(
for NORMAL mode only)
→
R
→
S
↑
The current channel level is displayed.
2 Press [SHIFT] + [CH LEVEL (+, –)].
Repeat steps
1 and 2 to adjust the level accordingly.
Delay time adjustments
Remote control only
By adjusting the delay time, the difference in the distance from the
viewing and listening position to the front speakers and the distance
to the center speaker and surround speakers can be offset and
made equal. This achieves better sound localization and makes a
more life-like reproduction of the sound field possible.
1. Press [SHIFT] + [DELAY] to select the channel to be
adjusted.
The current delay time is displayed.
Press again to change the speaker channel;
C (Center speaker)
↔
S (Surround speakers)
2. Press [SHIFT] + [CH LEVEL (+, –)] to set the delay time.
The delay time changes with each press.
The increments depend on the channel being adjusted.
Surround mode Speaker Available delay time setting (ms)
Dolby Digital
Center 0, 1, 2, 3, 4, 5
Surround 0, 5, 10, 15
Dolby Pro Logic Surround 15, 20, 25, 30
A see page 19 for information about delay time.
TEST EST CH SELECT CH SELECT CH H LE VE VEL
SUBWOOFER SUBWOOFER
7 8 9 0
DIS DISPL AY AY DI DIMME MER PL AY AY MODE PRO GR AM
4 5 6 10
MU MUTING PRESET T EQ
CL CLOCK CK
TIMER TIMER
PLAY
REC REC
SLEEP SLEEP
AUTO OFF TO OFF
DISC 1 2 3
TUNER UNER CD
S.SOUND EQ S.SOUND EQ
VOLUME VOLUME
TAPE PE
DE DEL AY AY PL
AUX AUX
DIGITAL-IN DIGITAL-IN
REW FF
CH SELECT
TEST
DELAY
SHIFT
– VOLUME +
CH SELECT
DIMMER
+
TEST
DISPL AY
CH LE VEL
PL AY MODE PRO GR AM
1
+
+
2
1.
+
2.
+
CH LE VEL
PL AY MODE PRO GR AM +
DEL AY
PL
CH LE VEL
PL AY MODE PRO GR AM
– CH LEVEL +