Panasonic SC-AK600 - Manual (Page 25)

25
RQT6243
Timer and other operations
Using the timers
Using the play/record timer
To change the timer
Press [
r PLAY/REC] to select the desired timer.
Every time the button is pressed the setting changes as follows.
To check settings
While the unit is on and the “
r PLAY” (or “ r REC”) indicator is on,
press [CLOCK/TIMER] so “ r PLAY” (or “ r REC”) appears on the
display.
Two seconds after “
r PLAY” (or “ r REC”) appear, the settings are
displayed in the following order:
• For play timer • For record timer
1 Play start time 1 Recording start time
2 Play finish time 2 Recording finish time
3 Play source 3 Recording source
4 Playback volume
You can check the settings even when the system is OFF by pressing
[CLOCK/TIMER] twice.
To enjoy the desired source after the timer setting is completed
The volume level (for play timer) and music source are stored in the
timer memory and the timer will start in these preset conditions.
However, the Disc numbers do not get stored in the timer memory.
1. After step 4, start playing the desired source.
2. Reset the Disc numbers if you have changed any of them, confirm
that a Disc or cassette is inserted, then press [ f ] to put the unit on
standby.
Note
• If you switch the system to the standby mode while the play/record
timer is functioning, the OFF time setting will not be activated.
• If AUX or DIGITAL input is selected as the source, when the timer
comes on, the system turns on and engages AUX or DIGITAL
input as the source. If you want to playback or record from a
connected unit, set the other unit’s timer to the same time. (See
the other unit’s instruction manual.)
REC PLAY
(Off)
CLOCK/TIMER
TEST EST CH SELECT CH SELECT CH H LE VE VEL
SUBWOOFER SUBWOOFER
7 8 9 0
DIS DISPL AY AY DI DIMME MER PL AY AY MODE PRO GR AM
4 5 6 10
MU MUTING PRESET T EQ
CL CLOCK CK
TIMER TIMER
PLAY
REC REC
SLEEP SLEEP
AUTO OFF TO OFF
DISC 1 2 3
TUNER UNER CD
S.SOUND EQ S.SOUND EQ
VOLUME VOLUME
TAPE PE
DE DEL AY AY
PL
AUX AUX
DIGITAL-IN DIGITAL-IN
REW FF
PLAY/REC
SLEEP
A
SLEEP
AUTO OFF
Remote control only
Using the sleep timer
Remote control only
This timer turns the unit off after a set time (Max. 2 hours, set at 30-
minute intervals). It lets you fall asleep listening to music.
While enjoying the desired source:
Press [SLEEP] to select the desired time.
Every time you press the button:
SLEEP 90 SLEEP 120 SLEEP 60 SLEEP 30 SLEEP OFF
The system is turned off after the set time has elapsed.
To cancel the sleep timer:
Press [SLEEP] to select “SLEEP OFF”.
To confirm the remaining time:
(only while system is ON)
Press [SLEEP].
To change the time remaining during operation:
Press [SLEEP] to show the remaining time then press [SLEEP] to
select the desired time.
Note
• The sleep timer turns OFF automatically the moment you attempt
to record a CD.
• The sleep timer can be used in combination with the play/record
timer.
The sleep timer always has priority.
Be sure not to overlap timer settings.
A