Pioneer Max 40XCAV ATAPI CD-ROM Drive Unit DR-944 - Manual (Page 5)

OB-U0192
5
Name of Parts/Function/Setting
3 . Device Configuration Jumper
Switch turns on by inserting short socket.
Make sure that drive power is turned off before jumper setting is changed.
Only MA is “on” at the time of shipping from the plant.
Pin Name Function
1 MA on The drive is used in Master Mode.
2 SL on The drive is used in Slave Mode.
3 CS on Using “Cable Select” function.
4 Reserved
5 Reserved
4 . Audio Output
A connector for output of analog audio.
This connector is compatible with “Molex 70553” , choose a connection cable which matches with the
connector.
Pin Name Function
1 L Left channel audio output
2 G Ground
3 G Ground
4 R Right channel audio output