Step procedure (continued) – Paradyne BitStorm IP DSLAM 1900 User Manual
Page 118
Advertising
2. BitStorm 1900 Installation and Testing
2-102
BitStorm 1900 Installation and Maintenance Guide
1900-A2-GN20-00
Step
Procedure
(continued)
NOTE: The browser application must be configured for "no proxies." Refer to
“Chapter 3. BitStorm 1900 Maintenance” on page 103 for more
information."
7.)
In the browser application, enter the IP address of a known,
working site on your network or on the Internet. Repeat this step for
several sites.
8.)
Once data connectivity has been established in step 7, verify dial
tone again on the room phone.
9.)
If the voice or data connectivity fails, refer to “Chapter 3. BitStorm
1900 Maintenance” on page 103.
STOP
<RX KDYH FRPSOHWHG WKLV WDVN
Advertising