Panasonic DMC-FZ7 - Manual (Page 53)

Advanced
53
VQT0V63
Aperture-priority AE
Set the aperture value to a higher number
when you want a sharp focus background.
Set the aperture value to a lower number
when you want a soft focus background.
1 Tilt the joystick towards 3/4 to
set the aperture value.
2 Take a picture.
• Refer to P55 for the available aperture
values and the shutter speed.
• Set the aperture value to a higher number
when the subject is too bright. Set the
aperture value to a lower number when
the subject is too dim.
• The brightness of the screen and the
recorded pictures may differ. Check the
pictures using the review function or
playback mode.
• The ISO sensitivity cannot be set to
[AUTO]. (P77) (The ISO sensitivity is
automatically set to [ISO100] when you
switch from [AUTO] to Aperture-priority
AE or Shutter-priority AE.)
• The aperture value and the shutter speed
displayed on the screen turn red when the
exposure is not adequate.
Shutter-priority AE
When you want to take a sharp picture of a
fast moving subject, set with a faster
shutter speed. When you want to create a
trail effect, set to a slower shutter speed.
1 Tilt the joystick towards 3/4 to
set the shutter speed.
2 Take a picture.
• Refer to P55 for the available aperture
values and the shutter speed.
• The brightness of the screen may differ
from the brightness of the actual pictures.
Check the pictures using the review
function or playback mode.
• You cannot set the following items in
Shutter-priority AE.
– Slow sync./Red-eye reduction [
]
(P42)
– [AUTO] in ISO sensitivity (P77) (The ISO
sensitivity is automatically set to
[ISO100] when you switch from [AUTO]
ISO100
3
F2.8 F2.8
1/30 1/30 F2.8 F2.8
3
1/30 1/30
1/30 1/30 F2.8 F2.8