Panasonic DMC-FZ7 - Manual (Page 87)

Menu Settings
87
VQT0V63
• Digital zoom cannot be used when using a
wide conversion lens.
• When there is dirt (water, oil, and
fingerprints, etc.) on the surface of the
lens, the image may be affected. Lightly
wipe the surface of the lens with a soft,
dry cloth before and after taking pictures.
• Ensure that [CONVERSION] is set to
[OFF] when not using a conversion lens.
• When using the conversion lens:
– The built-in flash cannot be activated.
–If you set [CONVERSION] to [OFF], the
performance of the conversion lens will
not be optimal.
• When using the tele conversion lens:
–We recommend using a tripod.
– The stabilizer function may not work
sufficiently.
– The focus indication may light due to the
jitter even if the subject is not focused.
– The time required for focusing may
become longer than usual.
• If you set [CONVERSION] to [ ], [ ] or
[ ], you cannot use the AF assist lamp.
(P82)
• Read the operating instructions of the
conversion lens for details.
Using the [PLAY] mode
menu
You can use various functions in playback
mode to rotate pictures, set protection for
them etc.
• Refer to P88 to 97 for each menu item.
1 Press [MENU/SET].
2 Press 3 4 to select the menu
item.
• Press 4 at A to switch to the next
menu screen.
3 Press 1.
• After selecting a menu item in step 3,
refer to the description of the menu
item in the operating instructions
and then set it.
C
EXIT MENU SELECT
PLAY 1 / 3
FAVORITE
ROTATE DISP.
SLIDE SHOW
DPOF PRINT
ROTATE
ON
OFF
EXIT MENU SELECT
PLAY 2 /
3
AUDIO DUB.
RESIZE
ASPECT CONV.
TRIMMING
PROTECT
SET MENU SELECT
PLAY 2 / 3
AUDIO DUB.
RESIZE
ASPECT CONV.
TRIMMING
ON
OFF
SINGLE
MULTI
CANCEL
PROTECT