Pioneer Super Tuner III D AVH-P6850DVD - Manual (Page 71)

Black plate (71,1)
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are six stored equalizer curves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display Equalizer curve
Powerful Powerful
Natural Natural
Vocal Vocal
Custom Custom
Flat Flat
Super Bass Super bass
! Custom is an adjusted equalizer curve that
you create.
! A separate Custom curve can be created
for each source. If you make adjustments,
the equalizer curve settings will be memor-
ized in
Custom.
! When Flat is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat and a set equalizer curve.
% On any source, touch EQ (displayed at
the left bottom corner) to select the equali-
zer.
Touch
EQ repeatedly to switch between the fol-
lowing equalizers:
Powerful
—Natural—Vocal—Custom—Flat
—Super Bass
Adjusting equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer
curve settings are memorized in
Custom.
! You can adjust the center frequency and
the Q factor (curve characteristics) of each
currently selected curve band (
LOW/MID/
HIGH).
Level (dB)
Center frequency
Q=2N
Q=2W
Frequency (Hz)
1 Touch EQ MENU on the audio function
menu.
2 Touch c or d on the BAND setting to
select the equalizer band to adjust.
Each time you touch c or d selects equalizer
bands in the following order:
LOW (low)
—MID (mid)—HIGH (high)
3 Touch c or d on the LEVEL setting to
adjust the level of the equalizer band.
Each time you touch c or d increases or de-
creases the level of the equalization band.
+6 to
–6 is displayed as the level is increased
or decreased.
4 Touch c or d on the FREQUENCY set-
ting to select the desired frequency.
Touch c or d until the desired frequency ap-
pears in the display.
Low:
40Hz —80Hz—100Hz—160Hz
Mid: 200Hz —500Hz—1kHz—2kHz
High: 3.15kHz —8kHz—10kHz—12.5kHz
5 Touch c or d on the Q.FACTOR setting
to select the desired Q factor.
Touch c or d until the desired Q factor ap-
pears in the display.
2N
—1N—1W—2W
<CRB2163-B>71
Audio Adjustments
En
71
Section
16
Audio
Adjustments