Panasonic BB-HCM381 User Manual
Page 189
Operating Instructions
189
•
If "Camera setup completed" is displayed, click [Close] to finish the
Manual Setup.
3.
Close all Setup windows.
Setting up the Camera Using the MAC Address on the Setup
Program
The Setup Program may not list any cameras due to your firewall or antivirus
software settings on your PC. If you cannot disable your firewall or antivirus
software, you can set up the camera using the camera MAC address as shown
below.
1.
Enter the camera MAC address in the data field, and click [Set up camera].
Note
•
The camera's MAC address can be found on the sticker affixed to the
bottom of the camera (see page 15 for BB-HCM381 or page 17 for
BB-HCE481).
2.
After confirming the network settings, click [OK].
•
After about a minute, the Security: Administrator page is displayed.