Panasonic BB-HCM381 - Manual (Page 52)

Operating Instructions
52
Basic
(1) Network (IPv4) Configures the IPv4 network settings to connect the
camera to the network (see page 54).
(2) Network (IPv6) Configures the IPv6 network settings to connect the
camera to the network (see page 59).
(3) IPsec Enables IPsec (Transport or Tunnel mode) (see page
63).
(4) UPnP Enables automatic port forwarding and creates a
shortcut to the camera (see page 73).
(5) DynamicDNS Registers with a DNS service, such as Viewnetcam.com
service (see page 76).
(6) Date and Time Sets the date and time, automatic time adjustment and
summer (daylight saving) time settings (see page 83).
(7) Camera Sets camera name, white balance, AC power source
frequency, automatic focus range, mounting type, pan/
tilt range, return to specified position, color night view,
and vertical resolution settings (see page 86).
(8) Audio Sets output, volume, PC audio input timeout, input,
camera microphone sensitivity and mute during pan/tilt
settings (see page 92).
Account
(9) Administrator
*1
Sets authentication and administrator security (user
name and password) (see page 94).
(10)
General User
*1 Sets general user security (user name and password)
and access levels (see page 99).
Buffer/Transfer
(11) Trigger Sets image buffer or transfer by timer, alarm, or motion
detection (see page 103, page 113, or page 125).
(12) Motion
Detection Sets the threshold and sensitivity for motion detection
(see page 139).
(13) Alarm Log Sets the information required to send log notifications by
e-mail (see page 143).
Advanced
(14) Image Display Sets the resolution, image quality and refresh interval of
the Single Camera and Multi-Camera page, as well as
time stamp setting, language and banner (see page
151).