Panasonic AK-HC910L - Manual (Page 9)

- 9 -
How to Install
_
How to set the lens
• Standard 2/3q bayonet type (B4 mount) lens of any makers can be used*.
1 Turn the lens fixing ring knob counterclockwise to remove the lens mount cap.
2 Set the lens in place, and turn the lens fixing ring knob clockwise to precisely fix the
lens.
3 Connect the lens cable to the lens connector.
4 Connect the remote (zoom/focus control) cable to the zoom/focus connector on the
rear panel.
* Note that there are some lenses uncontrollable with respect to zoom, focus function.
Be sure to ask the dealer for the installation,
adjustment and connection of this equipment.
_
How to install on the camera housing, pan/tilt head, tripod, etc.
1 Precisely set the camera on the camera housing, pan/tilt head, tripod, etc. by using
the camera set-screw hole (1/4-20UNC, 3/8-16UNC).
2 When mounting the camera on a pan/tilt head, be sure to use proper tools and
make sure that there is no fear of falling off.
Remote (zoom/focus control) Cable
(When a pan/tilt head is used, connect
the cable to the pan/tilt head.)
Camera Cable
(To Lens Connector)
Lens Fixing Ring Knob