Patton electronic 3088 - Manual (Page 24)

24
• dsl show syncstate: Shows the sync state of the DSL link: out of
sync, acquiring sync, in sync, or losing sync
• dsl show linkspeed: Shows the actual DSL data rate (minus
DSL overhead)
• dsl show linecond: Shows the line condition: good or poor
• dsl show nmr: Shows the noise margin ratio.
• dsl show errcntrs: Shows the following error counters: CRC, LOSW,
TX FIFO Full, TX FIFO Empty, TX FIFO Slip, TX Stuff, RX FIFO Full,
RX FIFO Empty, and RX FIFO Slip.
• dsl show errcntr crc: Shows the number of CRC errors that have
occurred since either startup or the last time that error counters
were cleared.
• dsl show errcntr losw: Shows the number of LOSW errors that have
occurred since either startup or the last time that error counters
were cleared.
• dsl show errcntr txfifofull: Shows the number of TX FIFO Full errors
that have occurred since either startup or the last time that error
counters were cleared.
• dsl show errcntr txfifoempty: Shows the number of TX FIFO Empty
errors that have occurred since either startup or the last time that error
counters were cleared.
• dsl show errcntr txfifoslip: Shows the number of TX FIFO Slip errors
that have occurred since either startup or the last time that error
counters were cleared.
• dsl show errcntr txstuff: Shows the number of TX Stuff errors that
have occurred since either startup or the last time that error counters
were cleared.
• dsl show errcntr rxfifofull: Shows the number of RX FIFO Full errors
that have occurred since either startup or the last time that error
counters were cleared.
• dsl show errcntr rxfifoempty: Shows the number of RX FIFO Empty
errors that have occurred since either startup or the last time that error
counters were cleared.
• dsl show errcntr rxfifoslip: Shows the number of RX FIFO Slip errors
that have occurred since either startup or the last time that error
counters were cleared.