Patton electronic 3088 - Manual (Page 37)

37
— If 3088 (Far End) already has an active remote console session
open, you will see the message Console: Remote console con-
nection request rejected. This can also happen if the remote
3088 (far-end) has an established remote console session with
the local 3088 (near-end) which has timed out.
6. Enter the password at the password prompt for the remote
console session.
Note The passwords for a local console session of the 3088 (near-
end) and the remote console session of the 3088 (far-end)
should be different for the purpose of security.
7. You should now be logged into the remote 3088(far-end) via the
remote console session. The communication with the remote 3088
(far-end) is essentially the same as having a local
console connection.
Note The local or remote 3088 may be CO or CPE, as long as there
is one of each. Either the CO or CPE unit may accept a remote
console connection.
Note With a remote console session open, a user at PC (far-end) is
blocked from using the local console. Upon typing anything, the
3088 (far-end) sends a message to the PC (far-end) stating
“Console: Remote console connection is open.”