PYLE Audio DVD - Manual (Page 15)

15
14. TROUBLE SHOOTING
Picture Disturbed When A DVD Is Recoded On A VCR Or Played Via
A VCR
➔ This player is compatible with analog copy protect type copy guard. Some discs include
copy prohibit signals. Such discs will not play properly when played via a VCR when
recoded on a VCR.
Play Cannot Be Operated With The Remote Control Unit
➔ Remote control unit is too far from the main unit or at too strong an angle with respect to
the remote sensor.
➔ Remote control unit’s battery is worn out.
TV & Other Device Operate Erroneously
➔ The player’s remote control unit may cause some TVs with wireless remote control to
operate erroneously.
No Sound Is Produced From Speakers Or Sound Is Distorted
➔ For some discs, 96KHZ digital output of linear PCM audio signals is prohibited.
➔ Disc is dirty
➔ Pause or slow play mode is set.
➔ Main unit’s volume is set to the minimum.
Volume Different For DVDs And CDs
➔ This is due to the different recording methods.
No Sound Is Produced Or Sound Is Distorted When Connected To A
TV, An Amplifier, Etc.
➔ Connection cords are not securely plugged in or not connected.
➔ Connection plugs or jacks are dirty
➔ Audio cables are not properly connected.
➔ DTS audio digital output is connected to a non-compatible AV amplifier, etc.
Player Gets Hot
➔ This is normal.
Note:
The player may stop operating properly due to static electricity or other external
influences. In this case, unplugging the power cord then plugging it back in will usually
resolve the problem. If not, consult your nearest service center.
Liquid Crystal Display
With liquid crystal display, a few picture elements may be black or shine particular color.
This is normal.