Function keys, Monitor trouble shooting – PYLE Audio DVD User Manual

Page 4

Advertising
background image

4

2. FUNCTION KEYS

2.1 FRONT PANEL FUNCTIONS

POWER:

Press the "POWER" button once, To "POWER ON."

Press it again, to "POWER OFF."

MENU:

Press MENU to Display OSD. Press again to exit MENU.

When in sub-menus, press "MENU" to return to the main MENU

UP/DN:

Use to make item selection in OSD menus and to

increase/decrease selection parameters.

3. MONITOR TROUBLE SHOOTING

3.1 NO POWER

1. Make sure the power cable has been pluged in.

2. Check power source for +12V.

3.2 REMOTE CONTROL NOT FUNCTIONING

1. Make sure the batteries are in good condition and installed properly.

2. Be sure to aim the remote control at the receiver and check to see there are no

obstacles in between.

3. Perhaps, it is too far away from the receiver. Normal operating distance is

approximately 20 feet.

3.3 NO DISPLAY OR PICTURE NOT CLEAR

1. Check the video signal wires to ensure they are connected properly.

2. Check for source signal.

Advertising