Panasonic SC-PM47 - Manual (Page 17)

RQT6530
17
Listening operations
CDs
Direct access play
By remote control only
Direct access allows you to start normal play from a specific
track to the last track of the CD.
1
Press [DISC].
2
(within 10 seconds or so)
Press [1] – [5] to select the disc you want.
3
Press the numeric button(s) to select the
desired track number.
Play will start with the track you select.
To select a two-digit track
Press [ 10] and then the two numbers you want.
For example
Track no. 20: [ 10]
→ [2] → [0]
Track no. 35: [ 10] → [3] → [5]
Note
You cannot use direct access play with 1-RANDOM or
A-RANDOM mode.
Repeat play
By remote control only
A Press and hold [PLAY MODE] before or during play.
“REPEAT ON” and “ ” are displayed.
To cancel repeat play
Press and hold [PLAY MODE] once again. “REPEAT OFF”
is displayed and “
” is cleared.
To repeat your favorite tracks
1. Program the tracks you want (perform steps 1 ~ 6 on
page 18.)
2. Press and hold [PLAY MODE] and make sure “REPEAT
ON” and “ ” are displayed.
3. Press [CD 2 / J ]. Playback will start.
To use repeat play with CD Play Mode function
Set the desired mode (
A page 16), press and hold [PLAY
MODE] before or during playback, and make sure “REPEAT
ON” and “
” are displayed.
B CD display
By remote control only
This function allows you to display the remaining play time
of the current track.
During play or pause mode
Press [DISPLAY].
Every time you press the button:
Elapsed play time ↔ Remaining play time
Note
When track number 25 or greater is playing, remaining play
time display shows “– –:– – ”.
A
B
1
2
3
1 2 3
4 5
DISC
PLAY MODE
DISPLAY
1 2 3
4 5 6 10
7 8 9 0
3
2
SLEEP
-AUTO OFF
CLOCK/
TIMER
PLAY/
REC
1 2 3 DISC
4 5 6 ≥ 10
7 8 9 0
DISPLAY DIMMER
AUX TUNER TAPE CD
PLAY MODE
/
PROGRAM
/REW/ /FF/ /CLEAR
MUTING S SOUND EQ PRESET EQ
VOLUME
ALBUM
1
CD
PLAY MODE
/
DISPLAY
Remaining play time
RQT6530(16-22).p65 5/9/2002, 6:41 PM 17