Pantech PN-215 - Manual (Page 14)

C
H
1
13
C
H
1
12
BATTERY USAGE BATTERY USAGE
BATTERY STANDBY TIME
The operating time is subject to your handset usage and configuration.
BATTERY USAGE TIMES
The operating time is subject to your handset usage and configuration.
These times are for a new battery. Usage and Standby time may
decrease over time.
• When you charge the battery with the phone power off, you
will see a charging status screen. You cannot operate the
phone until it is powered on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset
powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace
the battery.
1 Plug the AC Charger into a standard outlet.
2 Plug the other end of the AC Charger into the
bottom of your phone. The battery must be
installed onto the phone.
BATTERY CHARGING
POWER CONNECTION
PCS
Up to 203 minutes
Up to 350 minutes
DCS
Up to 203 minutes
Up to 355 minutes
STD 1000 mAh
Battery Capacity
EXT 1800 mAh
PCS
190 Hours
350 Hours
DCS
220 Hours
400 Hours
STD 1000 mAh
Battery Capacity
EXT 1800 mAh