Pantech PN-215 - Manual (Page 52)

C
H
4
51
C
H
4
50
SETTINGS
50
SETTINGS
To select a ringer type for incoming calls:
CALL SOUNDS
2 Select your desired ringer type.
3 Select one of the available ring types.
To confirm, press .
1 Press [MENU], then select “Settings & Tools”
menu, press “Sounds” then select
“Call Sounds”, press “Call Ringtone”.
Up or Down key : Select “Ringer”.
Press Play/Pause to Play/Pause the ringer.
CALL RINGTONE
2 Select “On” or “Off” with the Navigation Key then
press to save it.
1 Press [MENU], then select “Settings & Tools”
menu, press “Sounds” then select
“Call Sounds”, press “Call Vibrate”.
CALL VIBRATE
When selected, this setting alerts you to the following handset changes:
ALERT SOUNDS
1 Press [MENU], then select “Settings & Tools”
menu, press “Sounds” then select
“Alert Sounds”, press “TXT Message”.
TXT MESSAGE
2 Select “Tone”, “Vibrate” or “Reminder” with the
Navigation Key then select one of the following
options by pressing the Navigation Key.
Tone : Select your desired ringer type.
Vibrate : Select “On” or “Off”.
Reminder : Select “Once”, “Every 2 Minutes”,
“Every 15 Minutes” or “Off”.
3 To save, press .
1 Press [MENU], then select “Settings & Tools”
menu, press “Sounds” then select
“Alert Sounds”, press “PIX Message”.
PIX MESSAGE
2 Select “Tone”, “Vibrate” or “Reminder” with the
Navigation Key then select one of the following
options by pressing the Navigation Key.
Tone : Select your desired ringer type.
Vibrate : Select “On” or “Off”.
Reminder : Select “Once”, “Every 2 Minutes”,
“Every 15 Minutes” or “Off”.
3 To save, press .