Panasonic PT-DW90XE - Manual (Page 80)

PROJECTOR SETUP menu
80
- ENGLISH
Settings
When [MODE] of brightness control is
Q
[OFF]
The state that the brightness control is OFF is
displayed.
The name of this projector is displayed.
When [MODE] of brightness control is
Q
[AUTO] and [LINK] is [OFF]
The state that the LINK is OFF is displayed.
The name of this projector is displayed.
The state is indicated by color.
GREEN : The brightness can be corrected by a
significant margin.
YELLOW : The brightness can no longer be
corrected by a significant margin.
RED : There is an error in brightness control.
When [MODE] of brightness control
Q
is set to [AUTO] and [LINK] is set to
[GROUP A - D]
The brightness control of up to 8 projectors linked
with each other, including the projector operated
using the on-screen menu, is displayed.
The group to be linked is displayed.
The name and IP address of this projector are
displayed.
The projector name and IP address of the
same group detected through the network are
displayed.
The state is indicated by color.
GREEN : The brightness can be corrected by a
significant margin.
YELLOW : The brightness can no longer be
corrected by a significant margin.
RED : There is an error in brightness control.
An error message is displayed.
The information is updated.
If the message of [Failed to apply BRIGHTNESS
CONTROL to some projectors.] is displayed, the
projectors indicated in red are not linked.
Press ▲▼ to select a projector indicated in red,
then press <ENTER> button to display the details
of the error.
RETURN MENU
MODE OFF
PROJECTOR2
BRIGHTNESS CONTROL STATUS
RETURN MENU
LINK OFF
PROJECTOR2
BRIGHTNESS CONTROL STATUS
MENU SELECT
LINK GROUP A
PROJECTOR2 192.168. 0. 9
1: PROJECTOR1 192.168. 0. 8
2: PROJECTOR3 192.168. 0. 10
3:
4:
5:
6:
7:
UPDATE
BRIGHTNESS CONTROL STATUS