Phoenix Gold ZX475Ti - Manual (Page 16)

pg. 15
ZX Ti amp manual
SYSTEM DESIGN examples
The auxiliary outputs send lowpass signals out to the
Bass Cube and then back into the front inputs.
The front crossover frequency control determines the
XS62's highpass frequency and the XS124's lowpass
frequency.
Use the LPL44 to control the XS124's volume from the
driver's seat.
NOTE: Locating the Bass Cube in this position of the
signal flow allows only the low pass signal for the XS124
to be boosted. The XS62’s high pass signal will be
unaffected by the Bass Cube’s boost.