Phoenix Gold ZX475Ti - Manual (Page 9)

pg. 08
ZX Ti amp manual
SYSTEM DESIGN examples
The front crossover frequency control determines the
XS62's highpass frequency independently of the XS124
and rear speakers.
The rear crossover frequency control determines the
XS124's lowpass frequency and auxiliary output's high-
pass frequency.
The auxiliary outputs send highpass signals to another
amplifier.
Use the LPL44 to control the XS124's volume from the
driver's seat.
* For single preamp headunits, set the input select
switch to FRONT. This allows signals from the front
inputs to reach the rear crossover without the use
of “Y” connectors.
Minimum bridged load is 2 ohms.
Minimum load per channel is 1 ohm.