Panasonic SV-SR100 - Manual (Page 17)

17
RQT6457
Editing
Reference
MENU
ENTE
R/M
EMO
RY
1
2
AB
C
3
4
G HI
5
JK
L
6
M NO
7
PQ
RS
8
TU
V 0
10 >_ _
9
W XYZ
DE
F
:
9
SD
OPE
REC PAU
SE
VOL
UME
DISP
LAY CHARA
: 9
ENTER/MEMORY
MENU
SPA CE ! " #
Erasing tracks
Preparation:
≥
Press [
∫
, OPR OFF, FUNCTION] to select SD.
≥
Release the write-protect switch ( ➡ page 8).
1 Press [MENU].
“EDIT?” is displayed.
2 Press [ENTER/MEMORY].
3 Press [
:
] or [
9
] to select how to
erase tracks.
∫
TRACK ERASE: Erase one track at a time
(1) Select “TRACK ERASE?”.
(2) Press [ENTER/MEMORY].
(3) Press [
:
] or [
9
] to select the track you
want to delete.
(4) Press [ENTER/MEMORY].
If you selected the wrong track
Press [
:
] or [
9
] to select “CANCEL?” and
press [ENTER/MEMORY].
∫
ALL TRACK ERASE: Erase all tracks on the card
(1) Select “ALL ERASE?”.
(2) Press [ENTER/MEMORY].
4 After confirming the item to be erased,
press [ENTER/MEMORY].
Erasing is complete when ”CARD Writing” goes out.
After erasing one track, you can continue to erase
other tracks. Repeat the steps from step 3 and press
[MENU] when you are finished.
After erasing all tracks, editing ends automatically.
To stop partway
Press [MENU] before step 4.
Note:
≥
ALL ERASE can take several minutes (10 or more in
some cases) if there are a number of tracks on the card
or if it has a large volume.
≥
You cannot erase tracks that are in play lists created on
computer software (e.g., Panasonic Media Manager).
Formatting SD cards
CD
All data is erased when you format a card, includ-
ing data recorded with other equipment.
Preparation:
≥
Press [
∫
, OPR OFF, FUNCTION] to select SD.
≥
Release the write-protect switch ( ➡ page 8).
1 Press [MENU].
“EDIT?” is displayed.
2 Press [ENTER/MEMORY].
3 Press [
:
] or [
9
] to select “CARD
FORMAT?”.
4 Press [ENTER/MEMORY].
5 Press [ENTER/MEMORY].
Formatting is complete when “CARD Writing” goes
out.
To stop partway
Press [MENU] before step 5.
Anti-Skip System
This system uses digital compression technology to save
CD audio data in the memory (a maximum of 48 sec-
onds) and uses this data to fill in gaps caused by bumps
or vibration.
1 Press [MENU] while stopped.
2 Press [
:
] or [
9
] to select “ANTI
SKIP ON/OFF?”.
3 Press [ENTER/MEMORY].
The current settings appears.
4 Press [
:
] or [
9
] to select “ON?”
or “OFF?”.
5 Press [ENTER/MEMORY].
Note:
≥
If bumps or vibration continue, the elapsed play time
disappears and play is interrupted.
≥
The disc rotates faster while the system is on so there
may be a slight increase in disc rotation noise.
≥
The anti-skip system switches off automatically during
recording, but switches back on when you are finished.