Panasonic KX-TCD535HK - Manual (Page 50)

50
SMS Feature (Text Message)
• Before you send a message, you can choose to send the message to a specific base
unit telephone (if the receiver has more than one base unit telephone connected to
the same line) and also to send a private message to a specific person. You can also
request a receipt that your message has been sent. For details, see page 51.
• “Sending Message” is displayed after step 8. The display returns to the standby
mode, then “Transferring Message” is displayed.
• If the base unit does not have sufficient memory to send a message, the display will
show “SMS lists are memory full. Delete messages.”. The unit will then
return to the function menu.
• Once you have created an SMS message, the unit will display “ s
Use Last Text? ”
each time you select “Create”. If you want to use the text of the last message sent
once again, move the JOYSTICK up to recall the last message.
• If you try to send a message using a phone number (Destination) over 20 digits long
from one of the Phonebook, Caller ID or Redial lists, “Invalid Number” is displayed
and the display returns to “<Enter Phone No>”.
• The maximum message length is 640 characters. Please consult your SMS service
provider for further details.
• 69 messages can be memorized when you enter 80 characters/1 message. The
maximum number of memorized messages depends on the length of each message.
• If your phone is connected to a PBX (Private Branch eXchange: private branch
exchange), see page 64 to enter the destination number.
• After step 7, you can send a message to a Terminal number and specific person or
request a receipt that your message has been sent, see next page.
Follow steps 1 to 6 on pages 48 and 49, then:
7 “Save?” is displayed, then select “Yes” or “No”.
(If “Yes” is selected, “Saved Message” is displayed.) 8 Select “Send”.