Panasonic KX-TCD535HK - Manual (Page 61)

61
Teleph
one Syst
em
SMS Feature (Text Message)
Setting the Terminal Number
This feature is subject to the network service. Please contact your Network provider.
If you have more than one base unit telephone connected to the same line, you can set
your base unit Terminal number.
• Press dialling button through to enter the Terminal number.
Setting the Public Keys
This feature is only available when the other party has a Panasonic SMS-compatible fixed
line telephone, or an SMS-compatible fixed line telephone from another manufacturer
which features Public Keys. You can set up to 6 Public Keys and associate passwords
with the keys. This allows you to receive private messages that only you can access via
a password. The Public Key names can be a maximum of 5 characters. The names are
to be defined by yourself and made known to the selected private message senders.
The passwords is 4 digits. They are to be defined by yourself and known only to yourself.
• After you entered a 4-digit password, “Verify Password” will be displayed. Enter
the password again.
1 Press JOYSTICK
(or move). 2 Select
“
SMS ”.
3 Select
“Parameters”. 4 Enter 4-digit
Base Unit PIN.
(Factory preset
0000)
5 Select
“Terminal No.”. 6 Terminal
Number
Enter Terminal
number (1-9). 7 Press JOYSTICK. 8 Select “Save”.
1 Press JOYSTICK
(or move). 2 Select
“
SMS ”.
3 Select
“Parameters”. 4 Enter 4-digit
Base Unit PIN.
(Factory preset
0000)
Follow steps 1 to 4 shown above, then:
5 Select “Public
Key
”.
6 Select the desired Public
Key number (1-6). 7 Public Key name
Enter Public Key name.
(max. 5 characters)
8 Press JOYSTICK. 9 4-digit Password
Enter Public Key
password. 10 Select “Save”.