Using the virtual surround back mode, Listening to your system 05 – Pioneer VSX-1018AH-K 7 User Manual

Page 34

Advertising
background image

Listening to your system

05

34

En

Using the Virtual Surround Back mode

When you’re not using surround back speakers,
selecting this mode allows you to hear a virtual surround
back channel through your surround speakers. You can
choose to listen to sources with no surround back
channel information, or if the material sounds better in
the format (for example, 5.1) for which it was originally
encoded, you can have the receiver only apply this effect
to 6.1 encoded sources like Dolby Digital EX or DTS-ES.

1

The table indicates when you will hear the virtual
surround back channel (

=Virtual surround back

channel is active).

Press SBch repeatedly to cycle the virtual surround

back channel options.
Each press cycles through the options as follows:

VirtualSB ON – Virtual Surround Back is always used

(for example, on 5.1 encoded material)

VirtualSB AUTO – Virtual Surround Back is

automatically applied to 6.1 encoded sources (for
example, Dolby Digital EX or DTS-ES)

VirtualSB OFF – Virtual Surround Back mode is

switched off

Note

1 • You can’t use the Virtual Surround Back mode when the headphones are connected to this receiver or when any of the stereo, Front Stage Surround
Advance, Auto level control stereo or Stream Direct mode is selected.

• You can only use the Virtual Surround Back mode if the surround speakers are on and the SB setting is set to NO in the Speaker Setting on page 48.
• The Virtual Surround Back mode cannot be applied to sources that do not have surround channel information.

Type of source

SBch

Processing /

Virtual SB

mode

Standard

Advanced

surround

Multichannel

sources

Stereo sources

2 Pro Logic IIx 2 Pro Logic

Neo:6

Dolby Digital EX/DTS-ES 5.1 ch
sources with 6.1 ch flagged

ON

AUTO

Dolby Digital/DTS/SACD and DVD-
Audio 5.1 ch sources

ON

AUTO

Dolby Digital/DTS/PCM/SACD/WMA9
Pro and DVD-Audio stereo sources

ON

a

AUTO

b

Analog 2-channel (stereo) sources

ON

a

AUTO

b

DTS-HD Master Audio/DTS-HD/Dolby
Digital Plus/Dolby TrueHD/WMA9 Pro
encoded and PCM 6.1 ch/7.1 ch
sources

ON

c

AUTO

c

Dolby Digital Plus/Dolby TrueHD/
WMA9 Pro encoded and PCM 5.1 ch
sources

ON

c

AUTO

c

DTS-HD Master Audio/DTS-HD/
DTS-EXPRESS encoded 5.1 ch
sources

ON

d

c

AUTO

d

c

VSX-1018AH_KU.book 34 ページ 2008年4月17日 木曜日 午後2時37分

Advertising