Panasonic KX-FL501E - Manual (Page 23)

21
Volumes / Recall Feature
Adjusting volumes !
Ringer volume
4 levels (high/middle/low/off) are available.
While the unit is idle, press
or .
● If any documents are in the document entrance,
you cannot adjust the ringer volume. Confirm that
there are no documents in the entrance.
■ To turn the ringer off:
1. Press repeatedly until the following
message is displayed.
Display:
2. Press .
● To turn the ringer back on, press .
■ While the ringer volume is set to off:
The display will show the following message.
When a call is received, the unit will not ring and
will display the following.
INCOMING CALL
RINGER OFF
SET
YES:SET/NO:STOP
RINGER OFF= OK?
SET
Display /
Melody ringer
● You can select one of the four melodies
instead of the bell. Change the setting (feature
#17 on page 55). The melody you selected
will sound when the unit receives a call.
R
R button ! (to use the recall feature) !
is used to access special telephone
services (optional) such as call waiting.
Contact your telephone company business
office for details.
R
Example: Call waiting
When a call waiting tone is heard during a
conversation:
To hold the existing call and accept the
waiting call
Press .
● Each time you press , you can switch
between the first and second call.
Incoming calls cannot be dropped by the
person who has received the call.
R
R
If your unit is connected to a PBX, pressing allows you to access some features of your
host PBX such as transferring an extension call.
R
Monitor volume
8 levels (high to low) are available.
While using the monitor, press
or
.