Panasonic KX-FL501E - Manual (Page 29)

Caller ID
27
Caller ID service from your phone company !
This unit is compatible with the Caller ID service offered by your local telephone
company. To use this feature, you must subscribe to the Caller ID service.
How Caller ID is displayed
Set the following ring count settings to 2 or more rings beforehand.
—FAX ring count (feature #06 on page 55)
—TEL/FAX ring count (feature #78 on page 59)
Note:
● If the unit is connected to a PBX (Private Branch Exchange) system, you may not receive the caller
information. Consult your PBX supplier.
●
I f the unit cannot receive caller information, the unit will show the following.
The caller dialled from an area which does not provide Caller ID service.
The caller requested not to send caller information.
OR
The caller made a long distance call. LONG DISTANCE
WITHHELD
PRIVATE CALLER
OUT OF AREA
The calling party’s telephone number or name will
be displayed after the first ring.
You then have the option of whether or not to
answer the call depending on the caller.
Example:
The unit will automatically store the caller
information (telephone number, name and the time
of the call). You can view the caller information
(p. 28) and print the caller ID list (p. 29).
1234567890
Display
Important:
● This unit is designed in accordance with the “FSK based subscriber line protocol” under
the ETS (European Telecommunication Standard) and only supports the basic CLIP
(Calling Line Identification Presentation) features.
● This unit will only display the caller’s telephone number and name.
● This unit will not support future additional telephone services.
● This unit cannot support services based on the “DTMF based subscriber line protocol”.
● Depending on the service of the local telephone company, the date/time of the call or the
caller’s name may not be displayed.