PYLE Audio PLPK65TVD - Manual (Page 21)

21
location button for several seconds.
The current listening station will be
stored into the number button.
- Retrieve a Preset Station
Press any one of the RADIO
PRESET buttons (1~6) on remote
control to retrieve a station which
had been stored in the memory in
advance the chosen number is
shown on display.
• Automatic memory storing &
program scanning
- Program scanning
Press GOTO (AS/PS) button on
remote control shortly to scan preset
station. And it will hold at each station
for about 5 seconds.
- Automatic memory storing
Press GOTO (AS/PS) button on
remote control for several seconds, the
radio searches from the current
frequency and checks the signal
strength until one cycle search is
finished. And then stations are stored
into the preset number button in turn
according to the strength of stations.
When auto search is finished, it will
enter into preset scan mode
automatically.
• Mono/stereo
Press A-B (MO/ST) button on remote
control to select mono or stereo mode.
You can sometimes improve reception
of distant stations by selecting mono
operation.
• Mute
Press MUTE button on remote control
to cut down sound output. Press it
again to resume the previous volume
mode. When in the default menu, the
“MUTE” will appear on the screen
display.
• Menu Control operation in radio
mode
When you press MODE to select radio
mode, the menu will appear. Press SEL
button on remote control to select
VOLUME, then you can press CH /
OPERATION
buttons to select the item upward or
downward to switch between
VOLUME, BASS, TREBLE, BALANCE,
FADER, LOUD and EQ mode. Then
press VOL +/- buttons to adjust the
selected item. The corresponding value
will show on the display.
When you select EQ item, there are
four audio modes to be selected:
TV OPERATION
• Switching to TV mode
Press MODE button on remote control
to select TV mode.
• Auto searching TV channels
Press GOTO (AUTO) button for
several seconds on remote control
to start search channel
automatically.
In the course of searching, press
CH button to stop searching.
• Selecting channel
- Press CH button on remote control
to choose channel upward and press
CH button on remote control to
choose channel downward.
– The numeric buttons (0,1~9) allow you
to select the corresponding channel
directly.
– Press digital select button 10+(-/--)
cooperatively used with numeric
buttons to select channel desired.
For example, when you want select
16 channel, press10+(-/--) to switch
between “-“ and “--“, when the “--“
FLAT POP ROCK CLASSIC
FM1 98.1 MHz
MONO
VOLUME 40 M1 87.50
BASS -2 M2 90.10
TREBLE -2 M3 98.10
BALANCE L-R M4 106.10
FADER R-F M5 108.00
LOUD ON M6 87.50
EQ POP