Operation – PYLE Audio PLPK65TVD User Manual

Page 22

Advertising

appears on the display, you can press
“1 “button then press “6” button to
select 16 channel.

• Mute

Press MUTE button on remote control
to cut down sound output.
Press it again to resume the previous
volume mode.

• Screen display

Press TITLE (DSP) button on remote
control to display the current status
such as TVch. If you don’t operate over
five seconds, the information on the
screen will disappear.

• Menu Control operation in TV

mode
Press SEL button on remote control
to enter sound menu, then you can
press CH / buttons to select the
item upward or downward. Then
press VOL+/- buttons to adjust the
selected item. The corresponding
value will show on the display.

OPERATION

AV OPERATION

• Switching to AV mode

On the back of the unit, there is a pair
of AUDIO/VIDEO INPUT jacks. When
you connect an audio/video system
through these jacks, press MODE
button on remote control to select AV
mode.

• Menu Control operation in AV mode

Press SEL button on remote control to
enter sound menu, then you can press
CH / buttons to select the item
upward or downward. Then press
VOL+/- buttons to adjust the selected
item. The corresponding value will
show on the display.

• Mute

Press MUTE button on remote control
to cut down sound output. Press it
again to resume the previous volume
mode.

RGB OPERATION

• Switching to RGB mode

When you connect the RGB terminals
on the back of the DVD unit to the
corresponding RGB system, then
press MODE button on remote control
to select RGB mode, the RGB signal
will appear on the screen.

Note: When you press MODE button
to select RGB mode and there hasn’t
any RGB signal input, then there is
nothing to display on the screen.

VOLUME

BASS

-2

TREBLE

-2

BALANCE

L-R

FADER

R-F

LOUD

POP