Panasonic PT-AE1000U - Manual (Page 18)

18 - E NGLISH
Getting Started
Connections
Read and follow the operating and connecting instructions of each peripheral device.
The peripheral devices must be turned off.
Use cables that match each peripheral device to be connected.
Confirm the type of video signals. See “List of compatible signals” on page 45.
Audio cables must be connected from each peripheral device directly to the audio reproduction system.
Before connection to the projector
Connecting with COMPONENT/VIDEO/S-VIDEO
Connecting with HDMI/PC
NOTE:
Make sure the HDMI cable is adapted to your HDMI device for proper performance.
A compatible cable is required for an HDMI 1 080p signal.
It is possible to connect with DVI devices via a HDMI/DVI conversion adapter, but some equipment may not
project the image properly or other problems could be encountered. See “Serial terminal” on page 46.
DVD player Video player DVD player
To component
video output To S-video
output
To video
output
To HDMI output
HDMI cable
(RP-CDHG30: Optional)
RGB signal cable
To RGB output
PC DVD player
PT-AE1000U.book Page 18 Monday, October 16, 2006 1:40 PM