Panasonic PT-AE1000U - Manual (Page 38)

38 - E NGLISH
Settings
OPTION Menu
When you press INPUT or the INPUT SELECT button
to change the input method, the guidance appears in the
upper right corner of the screen. The following display
methods are available. Press I H to cycle through the
options.
You can change the background color of the menu.
Press I H to cycle through the options.
You can change the position where to display the menu.
Press I H to cycle through the options.
You can choose a BLUE or BLACK screen for when the
projector is idle. Press I H to select an option.
You can switch the logo on/off that is displayed when
starting up the projector. Press I H to select an option.
• ON: Active
• OFF: Deactive
When the projector is turned on, the input terminals are
detected and an input signal is selected automatically.
You can switch the system on/off. Press I H to select
an option.
• ON: Active
• OFF: Deactive
When an HDMI is selected, you can switch the HDMI
signal level NORMAL or EXPAND to display the image.
Press I H to select an option.
INPUT GUIDE
Options Function
OFF Turn off the guidance.
SIMPLE
Display the input method by text.
The INPUT GUIDE will go out after
5 seconds without any operation.
DETAILED
Display the input method by
graphic.
The INPUT GUIDE will go out after
10 seconds without any operation.
OSD DESIGN
Options Function
TYPE1 Semi transparent black
TYPE2 Solid blue
TYPE3 Semi transparent dark blue
See “Navigating through
the MENU” on page 28.
OSD POSITION
BACK COLOR
STARTUP LOGO
AUTO SEARCH
NOTE:
When no signal is detected, the last used input
will be selected.
HDMI SIGNAL LEVEL
NOTE:
HDMI SIGNAL LEVEL is not available with some
equipments.
UPPER
LEFT
UPPER
CENTER
UPPER
RIGHT
CENTER
LOWER
CENTER
LOWER
RIGHT
LOWER
LEFT
PT-AE1000U.book Page 38 Monday, October 16, 2006 1:40 PM