Planet Technology VIP-150T - Manual (Page 47)

PLANET VIP-150T User’s Manual 44
Chapter 5 Upgrading Software on the VIP-150T
VIP-150T supports three methods to upgrade the new version. All methods are necessary
to prepare the TFTP or FTP program on the host PC as TFTP/FTP server. After installing
TFTP/FTP program on one PC and connecting to network, VIP-150T is ready to be
upgraded.
1. LCD Panel Control
2. Remote Control: Telnet
3. Web Management
5.1 From LCD Phone Menu
Please choose the 6→2 selection-Firmware Upgrade. Press OK to enter into the
sub-selection as below.
1. Firmware Update
(1) Download method
There are two methods to download new version file, please move the
“>“ symbol by press ç or è on the keypad to select TFTP or FTP
method, then press OK to confirm it.
(2) FTP/TFTP Sever
User has to offer one TFTP/FTP server IP Address and set this IP
Address via keypad. The IP Address is necessary for upgrading
VIP-150T new application rom file.
(3) Set FTP user account
User has to input user name and password for FTP server login .It is
necessary for upgrading VIP-150T new application rom file via FTP
method.
(4) File Name
User has to press the file name of new application rom file prepared for
upgrading
(5) Start to Upgrade
Select YES or NO to start upgrade. After download is finished, press OK
then VIP-150T will ask if need to reboot.
(6) Firmware Version
Show versions of all software and hardware. (**)
?
Note:
Download via LCD command can only upgrade new application rom file.