Planet Technology VIP-150T - Manual (Page 5)

PLANET VIP-150T User’s Manual 2
♦
LCD: 2 lines, 24 character Dot Matrix display.
♦
C: Jump out current LCD menu.
♦ ç : Move to previous selection or clear previous data.
♦ è : Move to right or next selection.
♦
OK: Press OK to confirm the modification.
♦
Direct Line (DL) Button 1 – 10: User press DL button after off-hook to do speed dial
according to phone book data from 1-10 (please refer to LCD configuration-3.Phone
Book; Advanced Configurations via Telnet- 5.[pbook] command, or Web
Configuration-Phone Book chapter.
♦
Number 1
–10, * and #: The function is as the same as the general phone set.
Corresponding list of keypad and symbol:
1
“1”
2 “A” ; “ B” ; “C” ; “2”
3
“D” ; “E” ; “F” ; “3”
4
“G” ; “H” ; “I” ; “4”
5 “J” ; “K” ; “L” ; “5”
6
“M” ; “N” ; “O” ; “6”
7
“P” ; “Q” ; “R” ; “S” ; “7”
8 “T” ; “U” ; “V” ; “8”
9
“W” ; “X” ; “Y” ; “Z” ; “9”
*
“.” ; “@” ; “_” ; ”-“ ; “,” ; “!” ; “?” ; “*”
0 “0” ; “Space”
#
“#”
♦
MUTE: Mute the voice of MIC and let others can ’t hear from user in communication.
♦
PSTN: Press PSTN to switch VIP-150T as PSTN or IP Phone Mode. In PSTN mode,
“PSTN” characters will be displayed on LCD left bottom side, then users can dial out as
if standard telephone set in PSTN; in IP Phone mode, “PROXY ” characters will be
displayed on LCD left bottom side. (**)
?
Note:
1. When VIP-150T is in PSTN mode, only PSTN and SPEAKER function
key can work.
2. On LCD will display ”…Incoming Call... ” to inform user when VIP-150T
has both IP and PSTN side incoming calls.
3. If in communication with IP side, user can press HOLD to hold IP side,
then press PSTN to pick up PSTN side, after that can press HOLD again
to retrieve IP side.
4. If in communication with PSTN side, user must hang up PSTN side before
pick up IP side.