Panasonic AJ-SD755P - Manual (Page 40)

40
309
EDIT RPLCEC
The same type of setting as setup menu No.
305. This selects the channel concerned when
the CUE edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000 N-DEF :
Not set.
0001 CH1 :
Compliance with analog CH1 edit preset.
0002 CH2 :
Compliance with analog CH2 edit preset.
0003 CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
310
CONFI EDIT
This selects whether to conduct simultaneous
playback while editing is in progress.
0000 OFF : No simultaneous playback
0001 ON : Simultaneous playback
<Note>
Simultaneous playback is valid when the MODE
switch is set to TAPE.
Setup menus
The underlined items indicates the initial setting.
USER menu <EDIT>
No./Item Description
301
IN/OUT DEL
This selects the operation to be performed
when an edit point has been set incorrectly
(when the OUT point is before the IN point).
0000 MANU :
Editing is not executed unless the illegal edit
point is cleared or set again properly.
0001 AUTO :
The edit points already input are automatically
cleared.
303
STD/
NON-STD
This selects STD or NON-STD in accordance
with the composite input signal.
0000 AUTO :
Standard/non-standard signals are
automatically identified and processed.
0001 STD :
Standard signals are processed. (Forced STD)
0002 N-STD :
Non-standard signals are processed. (Forced
NON-STD)
<Note>
Use the non-standard (N-STD) setting when
video or audio trouble occurs with signals from
laser discs or a satellite.
304
SERVO REF
This selects the video signal processing.
0000 AUTO :
Servo is synchronized with the input signal
during recording and editing, or with the REF
signal during playback.
0001 EXT :
Servo is synchronized at all times with the REF
signal.
305
EDIT RPLCE1
This sets the channel assignments for the
controller’s analog audio preset when editing
the digital audio of the VTR using a controller
which does not have a digital audio edit
preset control function.
This selects the channel concerned when the
VTR CH1 edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000 N-DEF :
Not set.
0001 CH1 :
Compliance with analog CH1 edit preset.
0002 CH2 :
Compliance with analog CH2 edit preset.
0003 CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
306
EDIT RPLCE2
The same type of setting as setup menu No.
305. This selects the channel concerned when
the CH2 edit preset is set in compliance with
the ON or OFF presetting for the analog audio
signals designated by the controller.
0000 N-DEF :
Not set.
0001 CH1 :
Compliance with analog CH1 edit preset.
0002 CH2 :
Compliance with analog CH2 edit preset.
0003 CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
No./Item Description