Panasonic AJ-SD755P - Manual (Page 45)

45
Setup menus
The underlined items indicates the initial setting.
USER menu <VIDEO>
No./Item Description No./Item Description
600
INT SG
This selects the internal reference signal.
0001 BB :
The black burst is generated.
0002 CB100 :
100% color bars are generated.
0003 CB75 :
75% color bars are generated.
601
OUT VSYNC
This selects whether to float the vertical sync
position of the video output in order to align
the video output phase with the input in the
EE/record/edit modes.
0000 N-VF : Signals are not floated.
0001 VF : Signals are floated.
602
V-MUTE SEL
This selects whether to mute the video output
signals when a blank on the tape has been
detected during playback.
0000 N-MUTE : No muting. (Freeze)
0001 LOW RF : Muting. (Set to gray.)
603
CC (F1)
BLANK
This selects ON or OFF for the closed caption
signal of the first field.
0000 BLANK : Signal is forcibly blanked.
0001 THRU : Signal is not blanked.
604
CC (F2)
BLANK
This selects ON or OFF for the closed caption
signal of the second field.
0000 BLANK : Signal is forcibly blanked.
0001 THRU : Signal is not blanked.
606
OUT C KILL
This selects chroma color killer processing
for the video output signals.
0000 B/W : No color signals are output.
0001 COLOR : Color signals are output.
609
EDH
This selects whether to superimpose EDH
onto the SDI output signals.
0000 OFF : EDH is not superimposed.
0001 ON : EDH is superimposed.
<Notes>
O Even when ON is selected for this setting, EDH
is not superimposed onto the signals output
from the SDI OUT 3 connector if the SUPER
switch on the front panel of the unit is set to
ON.
O When no optional board (AJ-YA755G) has
been installed, setup menu No. 609 is not
displayed.
610
P B /P R IN LV
This selects the analog component input
level.
0000 M II : M II level
0001 B-CAM : ß-CAM level
614
P B /P R OUT LV
This selects the analog component output
level.
0000 M II : M II level
0001 B-CAM : ß-CAM level
611
YC SEP MODE
This selects Y/C separation processing for
the composite input signals.
0000 B/W :
The signals are processed as B/W signals.
0001 AUTO :
The signals are automatically detected.
618
INTERPOLATE
This selects the interpolation operation.
Vertical interpolation is conducted automatically
during slow-motion playback to reduce the
vertical movement of the playback pictures.
However, this menu item enables the
interpolation operation to be forcibly turned off.
0000 OFF :
Interpolation is forcibly turned off.
0001 AUTO :
Interpolation is automatically turned on during
slow-motion playback.
605
FREEZE SEL
This selects the freeze mode for still pictures.
0000 FIELD : Field freeze.
0001 FRAME : Frame freeze.
<Note>
When frame freeze has been selected, the frame
slow status is established with the slow setting.
621
CCR MODE
This selects the cross color processing
during playback.
0000 OFF :
The cross color is output with no changes
made.
0001 ON :
The cross color can be reduced.
620
ESR MODE
This selects the operation mode for edge
subcarrier reduction (ESR) in the playback
circuit.
0000 OFF :
The mode is forcibly set to OFF.
0001 AUTO :
The mode is automatically set to ON or OFF
depending on the VTR operation.