Planet Technology 802.11n Wireless ADSL 2/2+ Router ADN-4000 - Manual (Page 8)


Configuration
The ADN-4000 contains a HTTP server. This enables you to connect to
it, and configure it, using your Web Browser.
Preparation
Before attempting to configure the ADN-4000, please ensure that:
• Your PC can establish a physical connection to the ADN-4000. The PC
and the ADN-4000 must be directly connected (using the Hub ports
on the ADN-4000) or on the same LAN segment.
• The ADN-4000 must be installed and powered ON.
• If the ADN-4000's default IP Address (192.168.1.1) is already used
by another device, the other device must be turned OFF until the
ADN-4000 is allocated a new IP Address during configuration.
Using your Web Browser
1. Open web browser and type http://192.168.1.1 in the browser’s
address box. This number is the default IP address for this device.
Press Enter.