Pinnacle Speakers Lightning 1000 - Manual (Page 25)

19
Lightning 1000 Installation Guide
1) Motherboard and CPU 9) SVGA Card 17) Ch. 2 I/O Card (opt.)
2) CD ROM Drive 10) Network Card 18) Ch. 1 I/O Card (std.)
3) Floppy Disk Drive 11) DVE Card 19) Video Connector Board
4) CPU Fan Assembly 12) RS-422 Card 20) Control Connector Board
5) Standard Hard Drive 13) Blank Slot 21) Input Matrix Board
6) Ventilation Holes 14) Blank Slot 22) Rear Connector Panel
7) Power Supply & Fan Assembly 15) Blank Slot 23) Backplane Connector Panel
8) SCSI Card 16) Ch. 3 I/O Card (opt.)
Additional information is listed below, for selected items only.
1. Motherboard and CPU. The Motherboard and CPU provide the
electronics for the Windows NT platform and Lightning’s effects
computing power.
2. CD ROM Drive. The CD ROM Drive is provided for loading and
updating software.
3. Floppy Disk Drive. A standard 3.5" Floppy Disk Drive (1.44 MB)
is provided for offline storage of graphics, transitions, sequences
and layouts.
4. CPU Fan Assembly. The CPU Fan Assembly provides cooling for
the Motherboard and CPU underneath.
5. Standard Hard Drive. The standard Hard Drive provides storage
for the Lightning program, stills, transitions, sequences, and
layouts.
6. Ventilation Holes. These holes allow for cooling of the CPU and
Hard Drive
7. Power Supply and Dual Fan Assembly. The Power Supply provides
all required voltages. The Dual Fan Assembly cools the power
supply and additional interior components.
8. SCSI Card. The SCSI Card provides the electronics for the
system’s ultra wide SCSI capability.
9. SVGA Card. The SVGA Card generates menu output video and
SVGA signals.
10. Network Card. The Network Card provides the electronics for
connecting Lightning to a PC network.
11. DVE Card. The DVE Card provides the electronics for Lightning’s
GPI, remote control, and “layouts” capabilities.
12. RS-422 Card. This multi-port serial board provides four RS-422
ports for connection to optional Shotbaxes and automation
systems.Blank Slot.
13. Blank Slot