Pitney Bowes INTEGRA N500 - Manual (Page 13)

9
Integra™ 5 User Guide
T
AILORING
S
ETUP
O
PTIONS
Changing User
Options
User Setup
-Exit
-ON
Autoclear Class
-ON ClrZoneNewClass
-OFF Auto Weigh Hold
-Supervisor Setup
-Service Setup
After installing your scale and
becoming familiar with the location of
the keys, press the Setup key and
review the list of user default setup
options (shown at right).
Service Setup is accessible only by Pitney
Bowes Customer Service Representatives.
User Options are set to either on or off. They concern information you
can retain from mailpiece to mailpiece. The options are defined below.
Option Function
Autoclear Class When on, class information clears when you
remove a mailpiece from the scale.
Autoclear Zone When on, zone information clears when you
(Displays only when remove a mailpiece from the scale.
Autoclear Class is off.)
Clear Zone New Class When on, the zone clears when you select a
new class.
Auto Weight Hold When on, retains the weight of an item for a
brief time after the item is removed from
the scale.
1. Press the Setup key.
2. Press the menu selection key next to the option you want to
change. The screen indicates your change.
3. Select Exit to escape this menu.
4. Select Save or Cancel to save or cancel your changes.
After exiting setup mode, the scale reinitializes and returns to ready
mode.