Panasonic KX-TG2355 - Manual (Page 10)

Installation
10
Installing the Battery in the Handset
Insert the battery ( 1), and press it down until it snaps into the compartment (2).
Close the cover.
To replace the battery:
Press the notch on the cover firmly and slide it as
indicated by the arrow. Replace the old battery with a new
one (p. 11). Close the cover and charge the battery for
6 hours.
Battery Charge
Place the handset on the base unit.
Charge for 6 hours before initial use.
• The unit beeps once, the CHARGE
indicator lights, and “Charging” is
displayed.
• When the battery is fully charged, “Charge
completed” is displayed.
Battery strength
You can confirm battery strength
on the handset display.
Battery strength is indicated by
the icons shown in the chart to
the right. Display prompt Battery strength
5 Fully charged
6 Medium
7 Low
074 (flashing) Needs to be recharged.
8 Discharged
1
2
OR
CHARGE Indicator
PQQX14027YA.book 10 ページ ２００４年２月４日 水曜日 午後１時３５分