Initial setting, Set tel line, Set flash time – Panasonic KX-TG2355 User Manual
Page 49: Special features, Using the pause key, Flash button
Special Features
T
e
lephone System
For assistance, please call: 1-800-211-PANA(7262)
49
Using the PAUSE Key
(For PBX Line/Long Distance Calls)
We recommend you press Pause or P if a pause is
required for dial with a PBX or to make a long distance call.
Ex. Line access number [9] (PBX)
[9] N Pause or
P
N
• Pressing Pause or P once creates a 3.5 second pause.
This prevents misdialing when you dial after confirming
the entered number (p. 26) or dial a stored number
(p. 40, 41).
• Pressing Pause or P more than once increases the length of the pause between
numbers.
FLASH Button
Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX
such as transferring an extension call, or accessing optional telephone services
such as call waiting.
• Pressing [FLASH/CALL WAIT] cancels temporary Tone Dialing mode or the mute
(p. 48).
Selecting the flash time
The flash time required depends on your telephone exchange or host PBX.
You can select the following flash times: “700, 600, 400, 300, 250, 110, 100 or
90 ms (milliseconds)”. The factory preset is “700 ms”.
• If PBX functions do not work correctly, consult your PBX supplier for the correct
settings.
1
Press [MENU].
2
Scroll to “Initial setting” by pressing [
d
]
or [
B
], then press Select.
3
Scroll to “Set tel line” by pressing [
d
] or
[
B
], then press Select.
4
Scroll to “Set flash time” by pressing [
d
]
or [
B
], then press Select.
5
Select the desired time by pressing [
d
] or [
B
].
6
Press Save, then press [OFF].
Handset
OR
Example
9P15556667777
|
Clear Pause
K
L
9P15551234567
|
=Next P
Kf
d
L
Phone number
Handset
Base Unit
Handset
Initial setting
Back
Select
K
dB
L
Set tel line
Back
Select
K
dB
L
Set flash time
Back
Select
K
dB
L
Set flash time
:700ms
Back
Save
K
dB
L
PQQX14027YA.book 49 ページ ２００４年２月４日 水曜日 午後１時３５分