Polaroid TDB-3000AR - Manual (Page 12)

Instruction Manual
11
FUNCTIONS & FEATURES (continued)
Useful Remote Control Features
DISPLAY
This key allows you to display the current information of the TV screen on the upper right hand corner of the screen. (channel,
antenna mode, time, video, etc.)
TIMER
This key allows you to directly access the Timer menu. For an explanation of this menus features, please see page 10.
SCAN
Press the SCAN key twice, and the TV will begin to scan through all active channels. To stop the Scan, pressing any key can
interrupt scanning. Please note that Scan will only work in Antenna mode.
PICTURE
Your TV has factory preset picture modes that allow you to optimize your TV viewing. To activate these picture modes, press
this key, and you can choose among User, Normal, Movie and Sports.
RECALL
This key will allow you to return to the last channel you were viewing. Pressing it again will return you to the channel you just
left.
CC
Pressing the CC key will activate the currently selected Closed Captions or Text under the System Menu. Pressing it again will
turn off the Closed Captions or Text.
VIDEO
This key allows you to toggle between antenna and different video modes.
Child Lock
The Child Lock feature prevents unauthorized viewing of the TV. To activate, press and hold the F key, and then press MUTE.
You should see a key symbol appear on the screen. This will lock out all remote functions (except for Standby). To unlock the
TV, press and hold the F key and press MUTE. This will unlock the TV. Please note that the only way to activate or deactivate
the Child Lock feature is via remote control - please insure that it is stored securely.
SLEEP
Press the SLEEP key repeatedly to switch the TV to one of the following modes:
- -→15→30→45→60→90→120→180 (Unit: Minute)
The TV will automatically enter the Standby mode when the preset Sleep time is up.
The TV will display a message one minute before the Sleep timer runs out.
0-9
Press the 0-9 keys to enter channel numbers directly (2-69 in the Air mode or 1-125 in the Cable mode).
Press the corresponding Number key(s) to enter a channel number from high-digit to low-digit.
Each digit should be entered at 3 seconds time interval.