Connection to a tv identification of controls, Front panel, Rear panel – Polaroid TDB-3000AR User Manual
Page 20
FRONT PANEL
6
Connection to a TV
Identification of Controls
REAR PANEL
1
POWER ON/OFF
2
PREVIOUS
3
NEXT
4
PLAY
5
STOP
6
PAUSE
7
PICTURE CD INDICATOR
LIGHT
8
CD INDICATOR LIGHT
9
DVD INDICATOR LIGHT
10
REMOTE SENSOR
11
OPEN/CLOSE
12
POWER INDICATOR LIGHT
13
DISC TRAY
1
5 6 7 8
1
COMPOSITE VIDEO OUTPUT
2
ANALOG AUDIO OUTPUT R
3
ANALOG AUDIO OUTPUT L
4
DIGITAL AUDIO-COAXIAL OUTPUT
5
S-VIDEO OUTPUT
6
COMPONENT VIDEO OUTPUT Y
7
COMPONENT VIDEO OUTPUT Pb
8
COMPONENT VIDEO OUTPUT Pr
9
DIGITAL AUDIO-OPTICAL OUTPUT
9
2 3 4
NOTICE
• Refer to the manual of the connected TV.
• Turn off power and unplug both units before connecting.
• If you connect the DVD video player to a video cassette recorder (VCR), or TV/VCR combination, the playback picture will be
distorted because all DVD players incorporate copyright protection circuitry by Macrovision
®
.
• Keep the DVD video player away from any tuner or radio to avoid any static or distorted sound interference from a broadcast.
• Due to the wide dynamic range of sound output of the DVD video player, adjust the volume of your receiver to a comfortable
listening level to avoid any speaker damage.
REAR PANEL OF TV
S-VIDEO
Y P
b
P
r
L
R
COMPOSITE
VIDEO
BETTER
BEST
GOOD
TV
When connecting YPbPr, do not connect S-Video simultaneously.
Connect the DVD video player with an optional S-Video cable if the TV has an
S-Video input. Do not connect the yellow video cable if using the S-Video
cable.
Component output terminals when connected to selected TVs and monitors will
produce a higher quality picture playback. Depending on the selected TVs and
monitors, the wording of the component input terminals may vary. If there are any
fluctuations with the color played back, adjust the TV or monitor to achieve the best
audio and /or picture.
1
2
5
4
6
9
7
3
8
11
10
12
13