Reinstalling software, Before reinstallation, Reinstalling – Panasonic CF-T2 User Manual

Page 26: Troubleshooting

Advertising
background image

26

T

roubleshooting

Reinstalling Software

Before Reinstallation

Preparing

• Product Recovery CD-ROM (included)
• Panasonic DVD-ROM & CD-R/RW drive (optional: CF-VDRRT1M)

Reinstalling

Important

Before the reinstallation procedure, remove all peripherals (except for the DVD-ROM & CD-R/RW drive).
Be sure the AC adaptor is connected until the reinstallation procedure is completed.

When reinstallation procedure is performed, the contents of the hard disk will be erased. Be sure to back up any critical data on
your hard disk to another media or to an external hard disk before running the reinstallation procedure.
The reinstallation procedure will return the computer to its original condition.
Even if a hard disk backup area has been created, this backup area will be erased, and all the backed up data will be lost.
(This is not the case when Windows is reinstalled in the first partition.)
• If you have created partitions for data, the data may be erased or become corrupt as a result of the reinstallation procedure.

1 Turn off the computer and connect the DVD-ROM & CD-

R/RW drive to the computer.

2 Turn the computer on, and press F2 while [Panasonic]

boot screen is displayed.
The Setup Utility will start up.
If the password has been set, enter the Supervisor Pass-
word.

3 Write down all of the contents of the Setup Utility and then

press F9 .
At the confirmation message, select [Yes] and press
Enter .

4 Select [Boot] menu, then select [USB CD Drive] and press

F6 until [USB CD Drive] is at the top of the [Boot]
menu.

5 Place the disc number one of the recovery CDs into the

DVD-ROM & CD-R/RW drive.

6 Press F10 .

At the confirmation message, select [Yes] and press
Enter . The computer will restart.

<When the hard disk backup function has been enabled>
When the message [The Backup function has been enabled.
If [Recovery] or [Erase HDD] is executed, the Backup func-
tion will be disabled, and your Backup data will be lost.]
appears, press Y .

7 Press 1 to execute [1. [Recovery]].

(You can cancel this operation by pressing 0 .)
The License Agreement screen should appear.

8 Press 1 to execute [1. Yes, I agree to the provisions above

and wish to continue!].

9 Make a selection from the menu.

When selecting [2], enter the basic partition size for
the operating system installation and press Enter .
(The data partition size is the remainder after subtract-
ing the basic partition size.)
To select [3], the initial partition size must be 6 GB or
more of the hard disk size. Reinstallation cannot be
performed with a small partition size.

<When the hard disk backup function has been enabled>
If you select [1] or [2], the message [The Backup func-
tion has been enabled. If [Recovery] is executed, the
Backup function will be disabled, and your Backup data
will be lost.] appears. In this case, press

Y .

However, when [2] is selected, the hard disk backup func-
tion cannot be re-enabled because the hard disk has been
divided into partitions.

Windows 2000

Windows XP

This screen should appear.

---------------------------------------------------------------------

Select a number

---------------------------------------------------------------------

Reinstalling : Windows(R) XP Professional

1. Reinstall Windows to the whole HDD to factory default.
2. Make two partitions, for the operating system and data. And reinstall

Windows to the operating system partition.
(All existing partitions on HDD will be lost.)

3. Reinstall Windows to the first partition.

0. Cancel

---------------------------------------------------------------------

---------------------------------------------------------------------

Select a number

---------------------------------------------------------------------

Reinstalling : Windows(R) 2000 Professional

1. Reinstall Windows to the whole HDD to factory default.
2. Make two partitions, for the operating system and data. And reinstall

Windows to the operating system partition.
(All existing partitions on HDD will be lost.)

3. Reinstall Windows to the first partition.

0. Cancel

---------------------------------------------------------------------

Advertising