English, Troubleshooting worksheet – Polaris Vac-Sweep 360 User Manual

Page 11

Advertising
background image

www.polarispool.com

Action:

Sweep hose constantly sprays
water out of the pool.

Solution:

1. Adjust the speed of the sweep

hose by tightening the
adjustment screw.

2. Replace the sweep hose

scrubber (part #9-100-3105) if
it is worn or missing.

3. Add a sweep hose weight

(order part #B2) to keep the
sweep hose from spraying.

Action:

The cleaner does not clean the
entire pool.

Solution:

1. Check the hose length

reaches within 6" of the
farthest point of the pool. If
not, order a new hose section
from your Polaris dealer and
add it to the first hose section.

2. Check thrust jet for 11 o’clock

position that optimizes
random turning.

3. While the cleaner is operating,

hold it upside down and look
into the vacuum tube. There
should be three distinct, even
jets of water. If there are not,
contact Customer Service or
a Polaris authorized Service
Center for assistance.

Action:

The cleaner is running in
circles on its side.

Solution:

1. The filter bag is full and

weighing the cleaner down
on one side.

2. Remove the head float and

shake it. If there is water in
the float, order a new one.

3. The feed hose should float

evenly on the surface of
the pool.

Troubleshooting Worksheet

If these solutions do not result in

improved performance, contact the

Polaris dealer who sold you the cleaner

or call Customer Service.

In order to provide faster and more

convenient service, please have the

following information available at the

time of your call or when taking the

Polaris in for service.

1.

Serial #:________________________

2.

Wheel RPM:__________________

3.

Is the back-up valve cycling?

Yes

No

4.

Is the feed hose the proper
length?

Yes

No

5.

Are the swivels rotating freely?

Yes

No

6.

How often do you clean the filter
screen inside the quick
disconnect?

Never

Once a Week

Twice a Week

Once a Month

7. Are the vacuum jets obstructed?

(While the cleaner is operating, hold it upside

down and look into the vacuum tube. There

should be three distinct, even jets of water.)

Yes

No

8. Is the drive train functioning?

(As you spin each wheel independently, all

the wheels should spin.)

Yes

No

English

Advertising