Polaris Vac-Sweep 360 - Manual (Page 5)

www.polarispool.com
Installing Other Pool Connections
If the pool does not have a dedicated return line, the Polaris 360 connects to most common
return lines using special adapter kits available for purchase at a participating Polaris dealer.
For pools with plastic-pipe return lines (without pipe threads) that are cut off flush
with the pool wall:
If pipe is 1" in diameter, use
1" Stub Pipe Connection Kit
(part #9-100-8002)
If pipe is 1-1/2" in diameter, use 1-1/2" Stub Pipe Connection Kit
(part #9-100-8003).
For directional eyeball fittings that do not have a 1-1/2" threaded socket, request the
Eyeball Adapter Connection Kit (part #9-100-8005).
These are the most common, but not all of the possible pool connections.
If the UWF and Eyeball Regulators still cannot be installed on the pool, contact your
dealer or Customer Service to determine which parts may be necessary.
Other Connections Requiring Special Fittings
If a spa is connected to the pool filtration equipment, obtain expansion regulators in addition
to one of the kits listed above. Contact your dealer or Customer Service to determine which
parts may be necessary.
1" Stub Pipe Connection Kit
(part #9-100-8002)
1" Return Line
1" Expansion
Connector
1-1/2" Stub Pipe Connection Kit
(part #9-100-8003)
1-1/2"
Expansion
Connector
1-1/2" Return Line
Does current fitting
look like this?
Connector
Head
Retainer
Ring
Wall Fitting
Adapter
Eyeball Adapter Connection Kit
(part #9-100-8005)
1-1/4" Sleeve Kit
(part #8-841-00)
1-1/4" Return Line
1-1/4" Sleeve
Not included with kit
If pipe is 1-1/4" in diameter, order 1" Stub
Pipe Connection Kit (part #9-100-8002)
and 1-1/4" Sleeve Kit (part #8-841-00).
English